Ultimate Sound: Car Audio

Ultimate's completely redesigned T2 Series speakers, components, subwoofers and amplifiers are engineered with attitude and performance in mind, and deliver it through and through. We invest countless hours into creating the sound that you desire. And with a styling that will make you the envy on the block! Using proven engineering technologies like IMPP cones and MOSFET power supplies ensure that our T2 series products will provide you with clean and efficient audio reproduction for your listening pleasure. The sleek and industrial cosmetics integrate well into any vehicle without sticking out like most aftermarket products do.

T1 Series
> Speakers
> Subwoofer
> Amplifiers

T2 Series
> Speakers
> Subwoofers
> Amplifiers

FM Transmitter
> FM Transmitter

Head Units
> CD/MP3 Player

Mobile Video
> DVD Player
> Headrest Mount

Accessories
> Interconnects
> Fuse Holder
> Capacitors
> Power Wires
> Speaker Wires
> Amplifier Installations Kits

Automotive
> Seat Heating Systems

SUBWOOFERS

Ultimate’s new T2 Series subwoofers are designed to POUND! In order to develop great bass performance, a subwoofer must be engineered from the ground up. Using a proper balance of materials that control cone movement is essential in low frequency reproduction. Not to mention, these woofers ‘look’ like they ‘pound’! To keep the cone linear in the voice coil gap, a rubber butyl surround is used and distortion is kept ultra low. Side and rear venting of the voice coil is incorporated for cooling to prevent against thermal and mechanical failure. Heavy duty binding posts ensure you get the maximum power to the subwoofer without having weak terminals to compromise your bass performance.

Main Features
• IMPP woofer cone
• Butyl rubber, ultra linear surround
• Four layer KSV voice coil
• Strontium magnet structure
• Stamped steel basket
• Ventilated basket and back plate
• Heavy duty binding post terminals

T2-SW2541
10" - 600w Subwoofer

Specifications
Impedance: 4 ohms
Sensitivity: 87db
Frequency Response: 25 – 600 Hz
Power Rms: 150 watts
Power Max: 600 watts
Voice Coil Diameter: 2” (50.8 mm)
Mounting Depth: 5.5” (140mm)
Mounting Diameter: 9.125” (232mm)
Surround: Butyl Rubber
Cone: IMPP

t2-sw2541 subwoofer

T2-SW3041
12" - 800w Subwoofer

Specifications
Impedance: 4 ohms
Sensitivity: 88db
Frequency Response: 28 – 600 Hz
Power Rms: 200 watts
Power Max: 800 watts
Voice Coil Diameter: 2” (50.8 mm)
Mounting Depth: 6” (153mm)
Mounting Diameter: 11.125” (283mm)
Surround: Butyl Rubber
Cone: IMPP

t2-sw2541 subwoofer

T2-PR10
200w Amplified Subwoofer

Main Features
• Amplified Subwoofer – 200 watts
• Mosfet Power Supply
• Passive Radiator – 10”
• Low Pass Crossover – 50-150Hz @ 12dB/oct
• Bass Boost - 0-12dB @ 45Hz
• Variable Phase Control - 0-180°
• Dual Input – RCA and Speaker
• Delayed Turn-On – Soft Circuit
• Remote Bass Level Control
• Protection Circuitry – Thermal, Overload, Shorting

Specifications
Power
Continuous (RMS) . . . . . . . . . . . . . . . 150W
Maximum . . . . . . . . . . . . . . . . . . . . . 200W
Total Harmonic Distortion (THD) . . . . .. 0.5%
Signal to Noise Ratio (S/N) . . . . . . .. .. >80dB
Frequency Response. . . . . . . . . . . . . . 20Hz-150Hz

Crossover
Low Pass (Hz) . . . . . . . . . . . . . . . . . . 50-150Hz
Slope (dB) . . . . . . . . . . . . . . . . . . . . .12dB/oct
Bass Boost (dB @ Hz) . . . . . . . . . . . . .0-12dB @ 45Hz
Phase Control (degrees). . . . . . . . . . . 0-180°

Input Sensitivity
RCA input (volts) . . . . . . . . . . . . . . . . 100mV-4V
Speaker input (volts) . . . . . . . . . . . . . 480mV-15V
Dimensions (WxDxH): . . . . . . . . . . . . .400 x 250 x 310mm

t2-pr10